|
SPLIT LIMB BRACKETS
INSTRUCTIONS
Click here to download or print a PDF version |
|
BRACKET PLACEMENT FOR FULL SPLIT LIMB BOWS |
1. |
Lay
the bow on a flat surface with the string facing toward
you. Tentatively position the Quad Limb Brackets
at the end of each limb. On bows with large cams
the Brackets will need to be placed between the string
and cables
(Figure 5 & 6). On bows with small cams or
wheels the Brackets may need to be placed outside of the
string
(Figure 7).
|
|
|
|
|
2. |
Lay
the Bowmaster Portable Bow Press alongside the bow and
adjust to length (steps 2 and 3 of the Bowmaster
instructions) between the Quad Limb Brackets. |
3. |
Slide the Bowmaster cable ends into the slots of the
Quad Limb Brackets and turn the jackscrew just enough to
take the slack out of the cable which will hold the
Brackets in place.
|
4. |
Pick
the bow up and if necessary readjust the brackets so
that they are centered on each limb tip. |
5. |
Continue by following the
Bowmaster Portable
Bow Press instructions starting at step 6.
|